Accessories HOMMEL-ETAMIC T1000

Measuring table MT2

For holding and positioning workpieces.
Two co-ordinates ± 12.5 mm adjustable
Rotatable: ± 5° around vertical axis
Contact surface: 100 x 100 mm
Axis XYO Art. M0 435 278

Vee-block PB

Four different sized, finely ground vees guarantee a holding range for round workpieces and shafts with a diameter between 1 and 150 mm.
Art. M0 435 084

Parallel vices

Two small vee-blocks in the clamping jaws enable clamping
of right-angled and cylindrical workpieces.
Jaw width: 35 or 50 mm
Clamping range: 40 or 80 mm
M32 Art. 050 968
M50 Art. 050 965
With continuous tilting and rotating possibility:
M32 with fl exible foot Art. 050 966
M50 with fl exible foot Art. 050 963

Height stand HS 300

For reception of the traverse unit LV16.
Variable range up to 300 mm.
Art. 191 960

Tilt module for LV16

For height stand HS 300 and stationary measuring station.
Allows the traverse unit to be tilted up for easy loading and unloading of the workpiece.
Art. 1003 3157

Probe extension and limiting

Probe extension AZZ
55 mm Art. M0 435 041
100 mm Art. M0 435 042
Probe limiting TB16
for skid probe Art. 240 893

Roughness standards RNDX

RNDX I approx. 0.5 μ approx. 1.6 μ 256 318
RNDX II approx. 1 μ approx. 3.3 μ 256 125
RNDX III approx. 3.2 μ approx. 10 μ 233 213
DKD calibration certifi cate 1000 7481
Inspection report 1000 7482