HOMMEL-ETAMIC opticline C1000
-
Points of Contact
- News
- Downloads
- Dates
- Contact
Optical shaft measuring systems
Downloads
Manufacturer
Point of Contact
International Sales Support
Phone: +49 7720 602-0
Fax: +49 7720 602-123
HOMMEL-ETAMIC opticline C1000
The solution for larger shafts
The shaft measuring systems opticline C1014 and C1023 can measure workpieces up to a diameter of 140/230 mm, lengths up to 1000 mm and part weights up to 40 kg. The measuring systems are therefore very suitable for crank shafts, larger gear shafts and articulated shafts.
The shaft measuring systems opticline C1014 and C1023 can measure workpieces up to a diameter of 140/230 mm, lengths up to 1000 mm and part weights up to 40 kg. The measuring systems are therefore very suitable for crank shafts, larger gear shafts and articulated shafts.
The measuring systems of the opticline C1000 series are kept relatively compact despite their large measuring capacity. An optimum compromise between ergonomics, operating requirements and compact design.
The solution offers advantages such as: Air-conditioned cabinet with power electronics with measuring and evaluation computers, height adjustable operating
panel with 19” TFT screen, lockable cabinet with drawers for printer, tools and accessories.
The systems are available in versions with a sliding door as well as with a light barrier and roller shutter door.
The workpiece is held by a morse taper. The tailstock is very easy to position with a digital position indicator.
The version with the light barrier enables fast loading and unloading of different workpieces with maximum safety for the operator. A closed, lockable enclosure
can be created thanks to the integrated roller shutter door.
Combined optical and tactile measurement
The opticline C1000 systems can be optionally equipped with the tactile scanning system BTS 150 for axial face run-outs. The combination of optical and tactile measuring systems offers versatile application possibilities and high fl exibility.
The tactile measuring system can be used for measuring tasks at central measurement positions and on outer contours. It is an optimum addition to the
performance capabilities of the optical sensor system for the measurement of axial run-outs.
The measuring systems of the opticline C1000 series are kept relatively compact despite their large measuring capacity. An optimum compromise between ergonomics, operating requirements and compact design.
The solution offers advantages such as: Air-conditioned cabinet with power electronics with measuring and evaluation computers, height adjustable operating
panel with 19” TFT screen, lockable cabinet with drawers for printer, tools and accessories.
The systems are available in versions with a sliding door as well as with a light barrier and roller shutter door.
The workpiece is held by a morse taper. The tailstock is very easy to position with a digital position indicator.
The version with the light barrier enables fast loading and unloading of different workpieces with maximum safety for the operator. A closed, lockable enclosure
can be created thanks to the integrated roller shutter door.
Combined optical and tactile measurement
The opticline C1000 systems can be optionally equipped with the tactile scanning system BTS 150 for axial face run-outs. The combination of optical and tactile measuring systems offers versatile application possibilities and high fl exibility.
The tactile measuring system can be used for measuring tasks at central measurement positions and on outer contours. It is an optimum addition to the
performance capabilities of the optical sensor system for the measurement of axial run-outs.
Shipment
- Measuring machine
- Measuring and evaluation computer integrated in the measuring machine
- Software TURBO OPTIC V.3 for Windows
- Standard clamping devices and accessories
- Factory acceptance based on certified step shaft of the HOMMEL-ETAMIC GmbH
- Machine documentation
- Hardware and software manuals
- Measuring and evaluation computer integrated in the measuring machine
- Software TURBO OPTIC V.3 for Windows
- Standard clamping devices and accessories
- Factory acceptance based on certified step shaft of the HOMMEL-ETAMIC GmbH
- Machine documentation
- Hardware and software manuals